Alamo SR14 Bedienungsanleitung PDF herunterladen (Seite 138)

MAINTENANCE

SR20M/SR14M 11/01 Maintenance Section 5-8

Figure 19) Slide the shield tube assembly over the shaft, so that the bearing hles in the shield

align with the shield bearing groove on the yoke.

Figure 20) Install two shield bearings per half shaft by pushing one bearing in each bearing

hole. The shield bearings should be installed in the direction of the shaft rotation relative to the

shields

Figure 21) Attach safety decal as needed.

Figure 21

Figure 20

Figure 19

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 165 166

Keine Kommentare

Alamo SR14 Bedienungsanleitung Seite 138