Alamo SR14 Bedienungsanleitung Seite 1

SR20/ SR14FLEX-WING MECHANICAL LEVELLIFT ROTARY CUTTER / SHREDDERPublished 10/03 Effective Serial No. SR20-11310 Through Current Pa

Safety Section 1-4SR20M/SR14M 10/03© 2004 Alamo Group Inc.SAFETYSAFETYDANGER!Never allow children or other persons to ride on the Tractor or Implem

OPERATIONOperation Section 4-14OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/036.2 Setting Deck PitchTo facilitate safe and efficient operation, the m

OPERATIONOPERATIONOperation Section 4-15© 2004 Alamo Group Inc.SR14/SR20 10/03When fitting the mower to the tractor, the telescoping driveline must b

OPERATIONOperation Section 4-16OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/03“Bottoming Out” Check Procedure1. Disconnect driveline from the tractor

OPERATIONOPERATIONOperation Section 4-17© 2004 Alamo Group Inc.SR14/SR20 10/0310 DEG.80 DEG.80 DEG.CONSTANT VELOCITY JOINT-MAXIMUM ANGLE CHECK7.2 Co

OPERATIONOperation Section 4-18OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/038. PRE-OPERATION INSPECTION AND SERVICEBefore each use, a pre-operatio

OPERATIONOPERATIONOperation Section 4-19© 2004 Alamo Group Inc.SR14/SR20 10/03DANGER!All Safety Shields, Guards and Safety devicesincluding (but not

OPERATIONOperation Section 4-20OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/03¾ Ensure the tractor PTO master shield is in place,lowered and in good

OPERATIONOPERATIONOperation Section 4-21© 2004 Alamo Group Inc.SR14/SR20 10/03¾ Ensure each hydraulic cylinder is installed andretained correctly. E

OPERATIONOperation Section 4-22OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/039. DRIVING THE TRACTOR AND MOWERSafe tractor transport requires the op

OPERATIONOPERATIONOperation Section 4-23© 2004 Alamo Group Inc.SR14/SR20 10/039.1 Starting the TractorThe procedure to start the tractor is model sp

Safety Section 1-5© 2004 Alamo Group Inc.SAFETYSR20M/SR14M 10/03SAFETYWARNING! The operator and all support personnel should wear hard hats, safety

OPERATIONOperation Section 4-24OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/03Transport Lock Braces9.3 Operating the Mower WingsWings are positioned

OPERATIONOPERATIONOperation Section 4-25© 2004 Alamo Group Inc.SR14/SR20 10/03Start off driving at a slow speed and gradually increase your speed whi

OPERATIONOperation Section 4-26OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/039.5 Crossing Ditches and Steep InclinesWhen crossing ditches with stee

OPERATIONOPERATIONOperation Section 4-27© 2004 Alamo Group Inc.SR14/SR20 10/0310. OPERATING THE TRACTOR AND MOWERTHE OPERATOR MUST COMPLETELY UNDERST

OPERATIONOperation Section 4-28OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/0310.2 Bystander/Passersby PrecautionsIf a bystander comes within 100 ya

OPERATIONOPERATIONOperation Section 4-29© 2004 Alamo Group Inc.SR14/SR20 10/03WARNING!Mow at the speed that you can safely operate and control the Tr

OPERATIONOperation Section 4-30OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/0310.5 Operating the MowerMow only in conditions where you have clear vi

OPERATIONOPERATIONOperation Section 4-31© 2004 Alamo Group Inc.SR14/SR20 10/03Stay alert and watch for trees, low hanging limbs, powerlines, and othe

OPERATIONOperation Section 4-32OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/03When mowing across uneven areas such as road shoulders, ditch edges, an

OPERATIONOPERATIONOperation Section 4-33© 2004 Alamo Group Inc.SR14/SR20 10/0310.6 Shutting Down the MowerTo shut down the mower, first bring the tr

Safety Section 1-6SR20M/SR14M 10/03© 2004 Alamo Group Inc.SAFETYSAFETYWARNING! Never attempt to lubricate, adjust, or remove material from the Impl

OPERATIONOperation Section 4-34OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/03After disconnecting the mower hitch, remove themower driveline from the

OPERATIONOPERATIONOperation Section 4-35© 2004 Alamo Group Inc.SR14/SR20 10/0312. MOWER STORAGEProperly preparing and storing the mower at the end o

OPERATIONOperation Section 4-36OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/0313. TRANSPORTING THE TRACTOR AND MOWERBefore transporting the tractor

OPERATIONOPERATIONOperation Section 4-37© 2004 Alamo Group Inc.SR14/SR20 10/03Before transporting the tractor on a public roadway orboarding a traile

OPERATIONOperation Section 4-38OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/0313.1 Transporting on Public RoadwaysExtreme caution should be used whe

OPERATIONOPERATIONOperation Section 4-39© 2004 Alamo Group Inc.SR14/SR20 10/03Make sure that all tractor flashing warning lights,headlights, and brak

OPERATIONOperation Section 4-40OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/0313.2 Hauling the Tractor and MowerBefore transporting a loaded tractor

OPERATIONOPERATIONOperation Section 4-41© 2004 Alamo Group Inc.SR14/SR20 10/0314. TROUBLE SHOOTING GUIDEGear Box OverheatingTROUBLEExcessive Vibrati

OPERATIONOperation Section 4-42OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/03TROUBLEGear Box NoisyClutch Slips ExcessivelyGear Box LeakingPOSSIBLE C

OPERATIONOPERATIONOperation Section 4-43© 2004 Alamo Group Inc.SR14/SR20 10/03TROUBLEOil Squirting from Breather VentHolePOSSIBLE REMEDYDo not carry

Safety Section 1-7© 2004 Alamo Group Inc.SAFETYSR20M/SR14M 10/03SAFETYDANGER!NEVER use drugs or alcohol immediately before or while operating theTr

Maintenance Section 5-1MAINTENANCESECTION

MAINTENANCEMAINTENANCESR20M/SR14M 04/94 Maintenance Section 5-2© 2004 Alamo Group Inc.Before operating your

MAINTENANCEMAINTENANCESR20M/SR14M 06/98 Maintenance Section 5-3© 2004 Alamo Group Inc.TONGUE (FIGURE 2)The T

MAINTENANCEMAINTENANCESR20M/SR14M 04/94 Maintenance Section 5-4© 2004 Alamo Group Inc.FIGURE 5FIGURE 6GREASE

MAINTENANCEMAINTENANCESR20M/SR14M 11/01 Maintenance Section 5-5© 2004 Alamo Group Inc.MAIN CV DRIVELINE SAFE

MAINTENANCEMAINTENANCESR20M/SR14M 11/01 Maintenance Section 5-6© 2004 Alamo Group Inc.Figure 15) Remove the two shield bearings per half shaft by p

MAINTENANCEMAINTENANCESR20M/SR14M 11/01 Maintenance Section 5-7© 2004 Alamo Group Inc.Figure 17) Grease th

MAINTENANCEMAINTENANCESR20M/SR14M 11/01 Maintenance Section 5-8© 2004 Alamo Group Inc.Figure 19) Slide the shield tube assembly over the shaft, so

MAINTENANCEMAINTENANCESR20M/SR14M 11/01 Maintenance Section 5-9© 2004 Alamo Group Inc.BLADE SERVICINGInspect

Safety Section 1-8SR20M/SR14M 10/03© 2004 Alamo Group Inc.SAFETYSAFETYWARNING!Many varied objects, such as wire, cable, rope, or chains, can become

MAINTENANCEMAINTENANCESR20M/SR14M 11/01 Maintenance Section 5-10© 2004 Alamo Group Inc.BLADE SHARPENINGAlways sharpen both blades at same time to mai

MAINTENANCEMAINTENANCESR20M/SR14M 11/01 Maintenance Section 5-11© 2004 Alamo Group Inc.BLADE CARRIER REMOVAL

MAINTENANCEMAINTENANCESR20M/SR14M 11/01 Maintenance Section 5-12© 2004 Alamo Group Inc.SKID SHOESSkid shoes are made of carbon steel to reduce wear a

MAINTENANCEMAINTENANCESR20M/SR14M 11/01 Maintenance Section 5-13© 2004 Alamo Group Inc.STORAGEYour rotary cu

MAINTENANCEMAINTENANCESR20M/SR14M 04/94 Maintenance Section 5-14© 2004 Alamo Group Inc.WARNING BE CERTAIN TO

MAINTENANCEMAINTENANCESR20M/SR14M 06/98 Maintenance Section 5-15© 2004 Alamo Group Inc.DISASSEMBLY OF DIVID

MAINTENANCEMAINTENANCESR20M/SR14M 04/94 Maintenance Section 5-16© 2004 Alamo Group Inc.STEP 3Remove the Hub

MAINTENANCEMAINTENANCESR20M/SR14M 06/98 Maintenance Section 5-17© 2004 Alamo Group Inc.STEP 5Remove all eigh

MAINTENANCEMAINTENANCESR20M/SR14M 04/94 Maintenance Section 5-18© 2004 Alamo Group Inc.Assembly of WW75-340S

MAINTENANCEMAINTENANCESR20M/SR14M 06/98 Maintenance Section 5-19© 2004 Alamo Group Inc.FIGURE 40 FIGURE 41ST

Safety Section 1-9© 2004 Alamo Group Inc.SAFETYSR20M/SR14M 10/03SAFETYWARNING!Avoid mowing in the reverse direction when possible. Check to makes

MAINTENANCEMAINTENANCESR20M/SR14M 04/94 Maintenance Section 5-20© 2004 Alamo Group Inc.STEP 4Apply a small a

MAINTENANCEMAINTENANCESR20M/SR14M 06/98 Maintenance Section 5-21© 2004 Alamo Group Inc.STEP 5Install the Bea

MAINTENANCEMAINTENANCESR20M/SR14M 04/94 Maintenance Section 5-22© 2004 Alamo Group Inc.STEP 8Install a total

MAINTENANCEMAINTENANCESR20M/SR14M 06/98 Maintenance Section 5-23© 2004 Alamo Group Inc.STEP 11Install the se

MAINTENANCESR20M/SR14M 12/96 Maintenance Section 5-24MAINTENANCE© 2004 Alamo Group Inc.FIGURE 577236129,30,312827262524

MAINTENANCESR20M/SR14M 12/96 Maintenance Section 5-25MAINTENANCE© 2004 Alamo Group Inc.RIGHT ANGLE GEARBOX (OUTBOARD) AS

MAINTENANCESR20M/SR14M 12/96 Maintenance Section 5-26MAINTENANCE© 2004 Alamo Group Inc.Step 6. Using Soft Metal (Brass

LIMITED WARRANTY1. LIMITED WARRANTIES1.01.Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental,

In addition to the standard Limited Warranty shown on the facing page, Servis-Rhino also provides:1.) ONE-YEAR (12 months) {or 6 month for Commercial/

Safety Section 1-10SR20M/SR14M 10/03© 2004 Alamo Group Inc.SAFETYSAFETYCAUTION!To prevent tipping of implement when stored in folded position, usec

SR20ML-SOM-10/03Printed U.S.A.P/N 00763403C

SERVIS-RHINO®1020 S. Sangamon Ave.Gibson City, IL 60936-9907Please fold (do not tear), tape, and drop in any mailbox.PLEASE FILL OUT OWNER WARRANTY R

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

Safety Section 1-11© 2004 Alamo Group Inc.SAFETYSR20M/SR14M 10/03SAFETYWARNING!Never unhitch without using the Tongue Jack. The Tongue isvery heav

Safety Section 1-12SR20M/SR14M 10/03© 2004 Alamo Group Inc.SAFETYSAFETYPARTS INFORMATIONServis-Rhino mowers use balanced and matched system compone

Safety Section 1-13© 2004 Alamo Group Inc.SAFETYSR20M/SR14M 10/03SAFETY13741915221424271422242034CounterweightFor two-sectionCutter241134622234For

TO THE OWNER/OPERATOR/DEALERAll implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-mindedoperator who

Safety Section 1-14SR20M/SR14M 10/03© 2004 Alamo Group Inc.SAFETYSAFETYITEM PART NO. QTY LEVEL DESCRIPTION1 00725746 1 PELIGRO Get Manual Translate

Safety Section 1-15© 2004 Alamo Group Inc.SAFETYSR20M/SR14M 10/03SAFETY9- - 0076065716--007636131- - 0072574617- - 0076397712- - D10312- - D11410 -

Safety Section 1-16SR20M/SR14M 10/03© 2004 Alamo Group Inc.SAFETYSAFETY6- - 0075605920- - D13819- - D1378- - 007564945- - 007697369A- -00773723

Safety Section 1-17© 2004 Alamo Group Inc.SAFETYSR20M/SR14M 10/03SAFETY23- - 99101 22- - D303 3- - 007560044- - 0075600511- - 9994032- - 00753

Safety Section 1-18SR20M/SR14M 10/03© 2004 Alamo Group Inc.SAFETYSAFETY18- - D10221- - D30224-- 00757768SR2024-- 00766722SR14FORAIRPLANETIRE --0076

Safety Section 1-19© 2004 Alamo Group Inc.SAFETYSR20M/SR14M 10/03SAFETYThis section is intended to explain in broad terms the concept and effect of

In order to reduce accidents and enhance the safe operation of mowers, Alamo Group Ag Division, incooperation with other industry manufacturers has de

Alamo Group Ag. Division is willing to provideone (1) AEM Mower Safety Practices VideoPlease Send Me: VHS Format – AEM/FEMA Mower Operator Safety Vide

TABLE OF CONTENTSSAFETY SECTION ...

SAFETYSECTIONSafety Section 1-1

Introduction Section 2-1INTRODUCTIONSECTION

SR20M/SR14M 10/03Introduction Section 2-2INTRODUCTIONINTRODUCTION© 2004 Alamo Group Inc.Your SR 20 is a medium-duty Cutter designed primarily fo

Assembly Section 3-1ASSEMBLYSECTION

Assembly Section 3-2SR20M/SR14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.Set up cutter as received from factory with these instructions. Refer to

Assembly Section 3-3ASSEMBLYSR20M/SR14M 10/03ASSEMBLY© 2004 Alamo Group Inc.FIGURE 2. Tongue Assembly/Level Rod AssemblyTONGUE ATTACHMENTTo assembl

Assembly Section 3-4SR20M/SR14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.FIGURE 4. Wing Sections Attachments1234WING SECTIONS ATTACHMENTSWhile t

Assembly Section 3-5ASSEMBLYSR20M/SR14M 10/03ASSEMBLY© 2004 Alamo Group Inc.LEVEL LIFT AXLE ATTACHMENT (FIGURE 6)Attach the Center Level Lift Axle (

Assembly Section 3-6SR20M/SR14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.AXLE ADJUSTMENT ROD ATTACHMENTAttach the Axle Adjustment Rod w/Bushings

Assembly Section 3-7ASSEMBLYSR20M/SR14M 10/03ASSEMBLY© 2004 Alamo Group Inc.WING SECTION HYDRAULIC CYLINDER ATTACHMENTMount the 14" stroke Hydr

Safety Section 1-2SR20M/SR14M 10/03© 2004 Alamo Group Inc.SAFETYSAFETYA safe and careful operator is the best operator. Safety is of primary impo

Assembly Section 3-8SR20M/SR14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.FIGURE 10. Wheel Attachment

Assembly Section 3-9ASSEMBLYSR20M/SR14M 10/03ASSEMBLY© 2004 Alamo Group Inc.SPRING STOP ATTACHMENTThe Spring Stop is assembled to the stop bracket (

Assembly Section 3-10SR20M/SR14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.FIGURE 15. Rear Wing Section Deflector AttachmentFIGURE 16. Rear Cent

Assembly Section 3-11ASSEMBLYSR20M/SR14M 10/03ASSEMBLY© 2004 Alamo Group Inc.FIGURE 17. Front Chainguard attachmentCOUNTERWEIGHT ATTACHMENT (OPTION

Assembly Section 3-12SR20M/SR14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.DRIVELINE ATTACHMENTRemove Wing Nut holding Divider Gearbox Shield and

Assembly Section 3-13ASSEMBLYSR20M/SR14M 10/03ASSEMBLY© 2004 Alamo Group Inc.FIGURE 22CANOPY SHIELDSAfter final adjustment attach Canopy Shields ove

Assembly Section 3-14SR20M/SR14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.LEFT WING LIFT CYLINDER RIGHT WING LIFT CYLINDERTHREE SPOOL CONTROL VAL

OPERATIONSECTIONOperation Section 4-1

OPERATIONOperation Section 4-2OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/03IMPORTANT: To avoid mower damage, retorque all bolts after the first 10

OPERATIONOPERATIONOperation Section 4-3© 2004 Alamo Group Inc.SR14/SR20 10/03READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION

Safety Section 1-3© 2004 Alamo Group Inc.SAFETYSR20M/SR14M 10/03SAFETYREAD, UNDERSTAND, and FOLLOW the following SafetyMessages. Serious injury

OPERATIONOperation Section 4-4OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/03Horsepower Required (Min.)... 75 HP 75 HPCutting Capacity (Diameter)

OPERATIONOPERATIONOperation Section 4-5© 2004 Alamo Group Inc.SR14/SR20 10/031. OPERATOR REQUIREMENTSSafe operation of the rotary mower is the respo

OPERATIONOperation Section 4-6OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/032. TRACTOR REQUIREMENTSThe tractor used to operate the mower must have

OPERATIONOPERATIONOperation Section 4-7© 2004 Alamo Group Inc.SR14/SR20 10/032.4 DrawbarThe tractor drawbar must be positioned at a certainlength bas

OPERATIONOperation Section 4-8OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/03Never operate the Tractor and Mower if the Mower main driveline is direc

OPERATIONOPERATIONOperation Section 4-9© 2004 Alamo Group Inc.SR14/SR20 10/033. GETTING ON AND OFF THE TRACTORBefore getting onto the tractor, the o

OPERATIONOperation Section 4-10OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/034. STARTING THE TRACTORBefore starting the tractor ensure the followin

OPERATIONOPERATIONOperation Section 4-11© 2004 Alamo Group Inc.SR14/SR20 10/031. Ensure the tractor is equipped with the correct PTOshaft and the dra

OPERATIONOperation Section 4-12OPERATION© 2004 Alamo Group Inc.SR14/SR20 10/03Operating Mower Hydraulics with Two Tractor Hydraulic PortsThe lines th

OPERATIONOPERATIONOperation Section 4-13© 2004 Alamo Group Inc.SR14/SR20 10/03LEVELING DECK CENTER SECTION1. Place the tractor and mower on a level s