Alamo 60C Operator's Betreibershandbuch PDF herunterladen (Seite 37)

INTRODUCTION

1. A-Frame

2. Driveline

3. Cutter Deck

4. Tailwheel

5. Clutch Shield

6 Adjusting Strap

7. Support Yoke

8. Chain Guard

The BH20 Series Rotary Mowers are designed for medium duty applications such as grass, corn stalks and

light brush up to 3 inches diameter. These mowers are single spindle with two free-swinging blades. Each

cutter has free-swinging blades which reduce the shock of impact when a stationary object is hit. Additional

protection is provided by a slip clutch at the gearbox input shaft. A slip clutch protects the gearbox and drive

line from damage on all models. Standard equipment includes driveline shields, clutch shields and front and

rear discharge protection (deflectors or chains).

EQUIPMENT SPECITFICATIONS

BH25 BH26 BH27

Cutting Width 5 feet 6 feet 7 feet

Transport Width 5’ 6” 6’ 6” 7’ 6”

Transport Length 8’ 8” 9’ 8” 10’ 8”

Cutting Height 1-1/2” to 10-1/2” 1-1/2” to 10-1/2” 1-1/2” to 10-1/2”

Tractor HP Required 35HP 45HP 55 Min.

Cutting Capacity (max) 3” 3” 3”

Approximate Weight 906 bs. 1095 bs. 1328 lbs.

Hitch 3pt. Cat I and Cat II 3pt. Cat I and Cat II 3pt. Cat II and Cat III

Standard and QH Standard and QH Standard and QH

Gearbox 130 HP 130 HP 130 HP

Blade Tip Speed 14,600 ft./min. 15,000 ft./min. 14,450 ft./min.

Blades 1/2 x 4” 1/2 x 4” 1/2 x 4”

Driveline Protection Slip Clutch (Standard) Slip Clutch (Standard) Slip Clutch (Standard)

Guarding Front and Rear belting or Front and Rear Chains

Tires Single Laminated Single Laminated Single or Dual Laminated

Literature Page

www.algqr.com/ble

BH20 Series 04/13

Introduction Section 2-3

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 137 138

Keine Kommentare

Alamo 60C Operator's Betreibershandbuch Seite 37